The Powder Toy

TO220 Regulator With Thermal Shutdown by flakvierling

flakvierling
flakvierling
55 / 5
15th Oct 2020
21st Oct 2020
It regulates voltage and has iron heatsink. It's fully working and cools over time.
techy electronics transistors components radio

Comments

  • bomxacalaka
    bomxacalaka     16th Oct 2020
    TPT has no ground but you could pretend that no spark is a ground for this case a switch would work well
  • flakvierling
    flakvierling     15th Oct 2020
    since there is no ground in TPT*
  • flakvierling
    flakvierling     15th Oct 2020
    NC pin is normally GND in real life. I designed this regulator to lower the current density. You should give constant current to IN pin. At first NC pin was used to manually close the gate but I left that idea. In real life NC pin is GND pin since there is no ground in TBT i didn't named it as GND.
  • bomxacalaka
    bomxacalaka     15th Oct 2020
    the NC is used to close the gate, just like in real world you have to open it while its in use so add spark on both in and nc at the same time so see it working, this is like a MOSFET
  • flakvierling
    flakvierling     15th Oct 2020
    NC stands for "Not Connected" and It doesn't do anything.
  • TheJ485
    TheJ485     15th Oct 2020
    Does the NC actually do anything?
  • flakvierling
    flakvierling     15th Oct 2020
    yeah I can do that but I have to do some homework :P and giving credit is not neccesary.
  • Anaprantias
    Anaprantias     15th Oct 2020
    transformer*
  • Anaprantias
    Anaprantias     15th Oct 2020
    cool! Can you make it samller? may be usefull for my trasformer.. (i will give credit)