Difference between revisions of "Elements:Sensors"
(→DTEC Detektor) |
(Revert page back into english ... also wiki formatting should not be translated) |
||
| Line 4: | Line 4: | ||
=== [[File:INVS.png|INVS]] [[Element:INVS|Invisible]] === | === [[File:INVS.png|INVS]] [[Element:INVS|Invisible]] === | ||
| − | '' ' | + | '''Description:''' |
| − | + | Invisible to particles while under pressure | |
| − | '' 'Temp' '' | + | '''Temp:''' |
22C | 22C | ||
| − | + | When exposed to high pressures, INVS becomes intangible, allowing particles to pass through like E-wall. PHOT can pass through and be transformed into NEUT, but only when unpressurized. | |
| − | === [[ | + | === [[File:DTEC.png|DTEC]] [[Element:DTEC|Detector]] === |
| − | Description: | + | '''Description:''' |
| + | Detector, creates a spark when something with its ctype is nearby | ||
| − | ' Temp ' 22C | + | '''Temp:''' |
| + | 22C | ||
| − | + | Detector generates a spark (SPRK) when an it's ctype element is nearby. To set its ctype, draw over it with an element like you would with CLNE. When drawing the metal that will receive the spark, or any solid element nearby it, don't accidentally draw on top of the DTEC, because that will set it's ctype and instantly start sparking nearby metal. DTEC can be used as a replacement to detector wall so that you can make your creations smaller. | |
| − | You can set the | + | You can set the .tmp to determine the radius it detects elements from (in the shape of a square) |
| − | === [[ | + | === [[File:TSNS.png|TSNS]] [[Element:TSNS|Temperature Sensor]] === |
| − | '' ' | + | '''Description:''' |
| − | + | Temperature sensor, creates a spark when there's a nearby particle with a greater temperature (temp). | |
| − | '' 'Temp' '' | + | '''Temp:''' |
22C | 22C | ||
| − | + | If a material that is close to TSNS (in a one pixel radius, the 8 surrounding pixels) has a higher temp than the TSNS, it starts to spark nearby conductive materials (in a 2 pixel radius). You can set the TMP to determine the radius it detects temperatures from (in the shape of a square). It doesn't conduct heat, but stores the pressure given, just like TSNS. | |
| − | |||
| − | |||
| − | === [[ | + | === [[File:PSNS.png|PSNS]] [[Element:PSNS|Pressure Sensor]] === |
| − | '' ' | + | '''Description:''' |
| − | + | Pressure sensor, creates a spark when the pressure is greater than its pressure. | |
| − | '' 'Temp' '' | + | '''Temp:''' |
4C | 4C | ||
| − | + | Pressure sensor is used to detect if the ambient/air pressure is greater than the current temp of the sensor. If it detects such a pressure, it will spark any nearby conductors. It does not conduct heat, but stores the pressure given, just like TSNS. | |
| − | |||
| − | |||
| − | [[ | + | [[Category:Elements]] |
Revision as of 16:13, 5 May 2015
| Language: | English • español • 한국어 • polski • русский • 中文 |
|---|
This menu was introduced in 84.0 to fill the needs of the lately added sensor materials.
Invisible
Description: Invisible to particles while under pressure
Temp: 22C
When exposed to high pressures, INVS becomes intangible, allowing particles to pass through like E-wall. PHOT can pass through and be transformed into NEUT, but only when unpressurized.
Detector
Description: Detector, creates a spark when something with its ctype is nearby
Temp: 22C
Detector generates a spark (SPRK) when an it's ctype element is nearby. To set its ctype, draw over it with an element like you would with CLNE. When drawing the metal that will receive the spark, or any solid element nearby it, don't accidentally draw on top of the DTEC, because that will set it's ctype and instantly start sparking nearby metal. DTEC can be used as a replacement to detector wall so that you can make your creations smaller.
You can set the .tmp to determine the radius it detects elements from (in the shape of a square)
Temperature Sensor
Description: Temperature sensor, creates a spark when there's a nearby particle with a greater temperature (temp).
Temp: 22C
If a material that is close to TSNS (in a one pixel radius, the 8 surrounding pixels) has a higher temp than the TSNS, it starts to spark nearby conductive materials (in a 2 pixel radius). You can set the TMP to determine the radius it detects temperatures from (in the shape of a square). It doesn't conduct heat, but stores the pressure given, just like TSNS.
Pressure Sensor
Description: Pressure sensor, creates a spark when the pressure is greater than its pressure.
Temp: 4C
Pressure sensor is used to detect if the ambient/air pressure is greater than the current temp of the sensor. If it detects such a pressure, it will spark any nearby conductors. It does not conduct heat, but stores the pressure given, just like TSNS.
