Source code Infobox for displaying various element properties.

Most of them should be passed exactly as in the source code. However, the properties parameter should be space separated (so remove the pipes). Example: TYPE_LIQUID PROP_CONDUCTS PROP_NEUTPENETRATE PROP_LIFE_DEC

Example:

{{ infobox Element
| icon = ASDF.png
| longname = 
| image = 

| identifier = DEFAULT_PT_ASDF
| name = ASDF
| description = Very light dust. Flammable.
| colour = FFE0A0
| menusection = SC_POWDERS
| menuvisible = 1
| advection = 0.7
| airdrag = 0.02
| airloss = 0.96
| loss = 0.8
| collision = 0
| diffusion = 0
| explosive = 0
| falldown = 1
| flammable = 10
| gravity = 0.1
| hardness = 30
| heatconduct = 70
| hotair = 0
| meltable = 0
| state = ST_SOLID
| temperature = 2564.15
| weight = 85
| properties = TYPE_PART PROP_LIFE_DEC PROP_LIFE_KILL_DEC PROP_CONDUCTS PROP_NEUTPENETRATE PROP_DEADLY
| lowtemperature = 1234
| lowtemperaturetransition = DUST
| hightemperature = 5678
| hightemperaturetransition = special
| lowpressure = 
| lowpressuretransition = 
| highpressure = 
| highpressuretransition = 
}}

which gives

Properties
Section	Powders
Spawn temperature	2291°C
Heat Conductivity	28%
Relative weight	85
Gravity	0.1
Acid dissolve rate	3%
Flammability	10
State	Powder
Transitions
Low temperature	below 960.85°C
High temperature	transition occurs above 5404.85°C
Misc properties
Conducts electricity (SPRK)
Mangled by neutrons
Harmful to STKM
Source code