Walls

This category contains 19 elements, 16 of which are true walls, all of which are indestructible.

NOTE: some things like BRAY (when shot out from ARAY) can go through any wall. This is just because it doesn't check for walls when being created, it can't actually exist inside most walls. LIGH does the same.

Erase

Description: "Erases walls."

Conductive Wall

Description: "Blocks everything. Conductive."

Blocks: Everything

Allows: Nothing

Special: Conducts SPRK.

E-Wall

Description: "E-Wall. Becomes transparent when electricity is connected."

Blocks: Everything, unless powered

Allows: Nothing, unless powered

Special: Acts like Conductor when electrified, otherwise acts like WALL.

Detector

Description: "Detector. Generates electricity when a particle is inside."

Blocks: Nothing

Allows: Everything

Special: Will pass SPRK on to anything conductive while a particle is in its area. Gives out an orange glow when activated.

Streamline

Description: "Streamline. Set start point of a streamline."

Blocks: Nothing

Allows: Everything

Special: Shows you how pressure is moving around the simulation. Unlike other walls, the brush size doesn't matter.

Fan

Description: "Fan. Accelerates Air. Use the line tool to set direction and strength."

Blocks: Nothing

Allows: Everything

Special: Creates pressure and airflow. To use, place the Fan where needed. With the Fan wall selected, hold shift, click on the wall and drag in the direction you want air to flow.

Fan gives stickmen the ability to shoot out air, just like they would an element. Their heads will turn light blue and produce pressure upon pressing the down arrow or s. They will still get overridden by any other element.

Liquid Wall

Description: "Blocks most particles but lets liquids through. Conductive."

Blocks: Gases, Powders, Solids and Energy

Allows: Liquids and Pressure

Special: Conducts SPRK to anything conductive.

Absorb Wall

Description: "Absorbs particles but lets air currents through."

Blocks: Nothing, it absorbs them instead

Allows: Pressure

Special: Absorbs all particles that enter its space. However, if the particle has a vector speed (X) and the thickness is less than X, the particles will pass.

Wall

Description: "Basic wall, blocks everything."

Blocks: Everything

Allows: Nothing

Special N/A

Air-Only Wall

Description: "Allows air, but blocks all particles."

Blocks: Gases, Liquids, Powders, Solids and Energy

Allows: Pressure

Special: N/A

Powder Wall

Description: "Allows powders, blocks all other particles."

Blocks: Gases, Liquids, Solids and Energy

Allows: Powders and Pressure

Special N/A

Conductor

Description: "Allows all particles to pass through and conducts electricity."

Blocks: Nothing

Allows: Everything

Special: Conducts SPRK to anything conductive.

E-Hole

Description: "E-Hole. Absorbs particles, releases them when powered."

Blocks: Nothing, it absorbs them instead

Allows: Pressure

Special: Holds particles in place until electrified, releases them when electrified. Allows natural layering, resulting in powders and liquids that can "flow" through themselves. Forms Black Holes when too many parts are in one place. Each pixel of E-Hole can have up to 1500 parts in it before it forms Black Hole. E-Hole will also remove jetpacks from stickmen or fighters.

Gas Wall

Description: "Allows gases, blocks all other particles."

Blocks: Liquids, Powders, Solids and Energy.

Allows: Gases and Pressure

Special: This wall does allow FIRE as well.

Gravity Wall

Description: "Gravity wall. Newtonian Gravity has no effect inside a box drawn with this."

Blocks: Nothing

Allows: Everything

Special: If you make a box using gravity wall, then Newtonian gravity has no effect inside the box. It does not block things like pressure or elements, it just sets the gravity of all things inside the box to 0.

When a stickman/fighter makes contact, small purple rocket boots appear (also called Jetpacks), giving them the ability to fly by ejecting hot plasma downwards. A stickman can still use other elements, but cannot move without creating plasma, making it troublesome to walk across flammable or conductive materials. A stickman cannot be hurt by plasma when it has a jetpack on, but will still be hurt by heat.

Controls: ^ arrow key: up < arrow key: left > arrow key: right <> simultaneously held down: Brake (Slowly goes down)

Energy Wall

Description: "Allows energy particles, blocks all other particles."

Blocks: Gases, Liquids, Powders and Solids

Allows: Energy and Pressure

Special: N/A

Airblock Wall

Description: "Allows all particles, but blocks air."

Blocks: Pressure

Allows: All particles

Special: N/A

Erase All

Description: "Erases walls, particles, and signs."

Blocks: N/A

Allows: N/A

Special: N/A

Stasis Wall

Description: "Freezes particles inside the wall in place until powered."

Prevents movement and element update functions from running inside of the wall. If the stasis wall is sparked via another sparkable wall, then it will remove the stasis effect, allowing movement and updates again.