Element:CLST
| Properties | |
|---|---|
| Section | Powders |
| Spawn temperature | 22°C |
| Heat Conductivity | 28% |
| Relative weight | 55 |
| Gravity | 0.2 |
| Acid dissolve rate | 0.2% |
| Flammability | 0 |
| State | Powder |
| Transitions | |
| High temperature |
 above 982.85°C |
| Source code | |
Clay dust is a 'sticky' powder, whose particles tend to cling to each other. Stickiness becomes stronger with lower temperatures, turning clay dust almost into a solid below -78°C.
Because of its clinging abilities, clay dust tends to stack on top of itself like concrete.
The texture effect comes from the fact that the color of a clay dust particle is based on its .tmp value, which is random. The same effect is used in quartz and powdered quartz.
Creation
Ceramic will break into clay dust below 30.0 pressure:
→ 
Gel and sponge absorb water from paste and turn it into clay dust:
+ 
→ +
+ 
→ +
Molten silicon powder with oxygen may randomly produce molten clay dust with 1/3 probability if the temperature of molten silicon is below 7446.3°C:
3×
+ 3×
→ 
+ 
+
Reactions
Clay dust with water gives solid paste:
+ → 
Molten quartz and molten clay dust combine into ceramic:
+ → 2×
Clay dust mixed with nitroglycerin produces TNT:
+ → 
| Language: | English |
|---|
