Pocket fusion reactor by hullkk6
Thermonuclear reactors need a lot of energy to work, but they produce even more energy. That's why it's an efficient way to produce power. And 1-2 Hydrogen atoms heated with lasers under high pressure is enough to create fusion.
mini
fusion
hygn
dogface
Comments
-
hullkk6 19th Dec 2014
Oh, they're just there so you could see how I started working on the reactor. They work too if you put in HYGN, but they don't have much use besides that. You can use it in your projects if you want. -
Altzan260 19th Dec 2014
where do we put the reactor cores -
hullkk6 18th Dec 2014My main idea was to heat HYGN with lasers, that's why it's very important not to use URAN, but I replaced the DMND in the core with PUMP, so that shouldn't effect the heat switch anymore.
-
Sandwichlizard 17th Dec 2014
so palerider is right. your not getting heat out of this. and I dont really see fusion happening in the core. if you surround the chamber with a layer of URAN the pressure from a fusion reaction will make the URAN hot and heat the chamber. you can also use CRAY(HYGN) with a TEMP of 7000 or higher sparked with INST from outside the chamber to inject hot HYGN into the chamber instead of using CLNE -
hullkk6 16th Dec 2014To Sandwichlizard: Good to know, I've made changes accordingly. To TNTNUCLEAR: NIF was kinda the basis of my idea too!
-
Sandwichlizard 16th Dec 2014in TPT, to do fusion of hygn or nble the gas must be heated. the pump only needs to stay on to initiate the fusion as fusion creates pressure but you will need to heat the gas as fusion does not create heat.
-
Palerider 16th Dec 2014
i hate to say it but its not the fusion that is causing the heating but the initiation Aray, maybe try and cut power after the fusion has occured -
TNTNUCLEAR 15th Dec 2014
I'm trying to make a project of NIF, that is a fusion of hydrogen by lasers! -
Guillian 15th Dec 2014
it doesntfit in my pocket, and congratz on first frontpage +1 -
hullkk6 15th Dec 2014My first really successful save yet. Thank You for FP!!!