The Powder Toy

Hydrogenesis Chamber V2 by Biter

Biter
Biter
2 / 0
2nd February
5th February
The OXYG-HYGN chamber kept melting due to PLSM appearing via HYGN ignition. So the chamber has been replaced with DMND. i also modified the PIPE so it is indestructible

Comments

  • Beamngdriver
    Beamngdriver     5th February
    more like HydroDEgenesis
  • Biter
    Biter     5th February
    platinum walls have been installed
  • Biter
    Biter     5th February
    atleast it produces distilled water :)
  • Kezwick
    Kezwick     2nd February
    In general, this is a cool project that can be improved endlessly
  • Gowate
    Gowate     2nd February
    Also using BOYL, would meean you'd have to filter water, which isn't hard but might require a complete rework of the chamber for water to flow down through an opening
  • Gowate
    Gowate     2nd February
    Ii don't know if that's what Biter is going for, I thought you said using PTNM as a separate tip from the BOYL one, because it doesn't make sense to recommend PTNM in particular if no heat is generated, Biter could use litteraly any non destructible metal. Even ceramic could work.
  • Kezwick
    Kezwick     2nd February
    Variable heating to 100+ degrees and cooling to ~80-90 degrees will additionally turn fog into water and increase production
  • Kezwick
    Kezwick     2nd February
    Gowate: ID3077142 Looks like this
  • Kezwick
    Kezwick     2nd February
    Gowate: This is a synthesis of water without high temperatures, there will be no fire
  • Gowate
    Gowate     2nd February
    If you really want to use a destructible material, you're gonna need cooling. Either passive (self cooling materials) or active (LN2/CLFM clone, static GOL structures (like 2 pixel thick WALL rectangles)) I'd recommend a circle of PTCT or NTCT about 15 pixels thick. These materials have the advantage of cooling themselves to room temperature at a rate of 2.5C per frame, this should suffice since gas aren't good heat conductors.