The Powder Toy

Thermometer calibration

  • cinebox     4th Apr 2011 Member 0 Permalink
    could someone help calibrate this thermometer below, i jus need them to tell me the temp. range for each of the 7 sensors. heat/cool the FILT at the bottom where it says "UTP"
    252104View Save 252104
  • cctvdude99     4th Apr 2011 Member 0 Permalink
    @cinebox
    Just put signs on each of the 7 sensors. {t} in a sign.
  • cinebox     4th Apr 2011 Member 0 Permalink
    i don't understand
    EDIT: i need the temp rang the FILT must be in for the laser to hit that sensor
  • Sublimity     4th Apr 2011 Member 0 Permalink
    {t} displays the temperature. So if you make a sign and put {t} in it, it shows the temperature.
  • cinebox     4th Apr 2011 Member 0 Permalink
    That's not what i ment. i need to know what each sensor should display on the screen. open the save to see what i ment.
    SOMEBODY HELP PLZ!!!!!
  • iggyfigs     4th Apr 2011 Member 0 Permalink
    Thats some epic electronics, for every temperature range you need a whole new lookup matrix to find the combinations to the LCD displays. Also i noticed your LCD displays are pretty big and bulky. Mine are a lot more compact :)
  • cinebox     4th Apr 2011 Member 0 Permalink
    yeah iknow. i made some edits accidently in the beta, so now i can't publish
    working on the matrix now, not that hard :)
    EDIT: done with the matrix, just need to copy/paste and hook up to the display. then i program it with the data i don't know how to find >:(
You need to login before you can post replies